Home > Timed Out > Timed Out 2nd T303 To

Timed Out 2nd T303 To

extension-length 4 extension-pattern 2... I will try both of Mark's and Darel's suggestions. E6 - Recovery on timer expiry. Quote + Reply to Thread « Previous Thread | Next Thread » Social Networking & Bookmarks Bookmarks Digg del.icio.us StumbleUpon Google Tweet CompTIA Cisco Microsoft CWNP InfoSec Practice Exams Forums Check This Out

But outgoing calls can not go through > unless I do a reload of the router.I get the following error when I do a > debug isdn q931 > > > Below is the basic one I use. dial-peer voice 203 pots description == International Calls into Detroit from PSTN Coming from NL Pho translation-profile outgoing BR1-Proper-Types destination-pattern 0015126022... I will show my running config if needed again but the core problem is with the scripts themselves I'm willing to bet. https://supportforums.cisco.com/discussion/12146276/error-ccpcccallorigination-setup-timed-out-2nd-t303-network-setup-failed

no ip dhcp use vrf connected ip dhcp excluded-address 192.168.3.1 ip dhcp excluded-address 192.168.3.1 192.168.3.2 ! interface FastEthernet0/0.11 description Management vlan encapsulation dot1Q 11 ip address 10.11.0.1 255.255.255.0 ! ephone-dn 4 dual-line number 31107047444 secondary +31107047444 label Rotterdam, NL +31 10 704 74 44 name Rotterdam NL Phone ! ! Quote draught Senior Member Join Date Feb 2012 Location Los Angeles Posts 161 Certifications CCNA Voice, CCNA R&S, CCENT, A+, Network+, Security+ 02-19-201410:16 PM #16 I restarted the lab and

What I'm going to try next is to put the flash files for the phone on the PSTN as well. voice-port 0/2/0 ! call_cleared: VOICE ERROR: Bearer capability not available(0x3A): bchan -1, call. ricardo.godinho Nov 13th, 2014.

network-clock-participate wic 0 ! it will be in out of coverage mode. . //-1/8103BC75800C/CCAPI/cc_api_call_setup_ind_common: Interface=0x488C39C4, Call Info(Calling. Check out www.PlatinumPlacement.com Previous message View by thread View by date Next message [OSL | CCIE_Voice] Weird error message when calling Randall Crumm Re: [OSL | CCIE_Voice] Weird error message when you could try here dial-peer voice 103 pots description == International Calls into Baltimore from PSTN Coming from NL P translation-profile outgoing HQ-Proper-Types destination-pattern 0012065011...

EST 2. 00. 9I have experienced this before. control-plane ! ! ! When the problem happens I > notice TIMER_RECOVERY on the layer 2 status and I will do a clear interface > serial 2/0:15 and clear controller E1 2/0 which will change for: Mailing List.

  1. dial-peer voice 1001 voip description == SIP ITSP Calls from CUCM or CUCME voice-class codec 1 session protocol sipv2 incoming called-number .
  2. The SETUP failed. | IP Telephony | Cisco Technical Support Forum | 5961 | 12146276.
  3. dial-peer voice 411 pots service info incoming called-number [2-8]11 !
  4. you had 4k+ line code violations on RtrPod1, can you check isdn status on both devices, also you may want to change clocking to you your PSTN Internal.
  5. voice translation-rule 303 rule 1 /^703.*/ /\0/ type any subscriber plan any isdn rule 2 /^010/ // type any national plan any isdn rule 3 /^1/ // type any international plan
  6. voice translation-rule 10 rule 1 /206501\(.*\)/ /\1/ !

Mark Hollowaymh at markholloway. the controllr is multiple frame established. Join UsClose [prev in list] [next in list] [prev in thread] [next in thread] List: cisco-voip Subject: Re: [cisco-voip] ISDN PRI problem From: Abebe Amare RELEASE_COMP pd = 8 callref = 0x.

Quote Login/register to remove this advertisement. his comment is here dial-peer voice 9104 pots service ld incoming called-number 15105[^5]..... ! H.225 Setup Timeout (t303) Unanswered Question. On Mon, Nov 23, 2009 at 7:54 PM, Mark Holloway <mh [at] markholloway> wrote: > I have experienced this before.

Read All 5 Posts. crypto pki token default removal timeout 0 ! Posts: 92 | From: Muscat | Registered: May 2013 | IP: Logged All times are Eastern Time Printer-friendly view of this topic Hop To: Select a this contact form thanks for all of you to reply ..Regards,Anis 0 Back to top Back to CISCO VOICE (CCNA, CCNP, CCIE) 1 user(s) are reading this topic 0 members, 1 guests, 0 anonymous

ip cef no ip dhcp use vrf connected ip dhcp excluded-address 10.10.0.1 10.10.0.10 ip dhcp excluded-address 10.15.0.1 10.15.0.10 ! Quote draught Senior Member Join Date Feb 2012 Location Los Angeles Posts 161 Certifications CCNA Voice, CCNA R&S, CCENT, A+, Network+, Security+ 02-02-201404:14 PM #13 This loops when I use Here is the PSTN simulator 911 tcl script proc init { } { global param set param(interruptPrompt) true set param(abortKey) * set param(terminationKey) # } proc act_Setup { } { global

direct-inward-dial port 0/0/1:23 forward-digits 10 !

the problem was from service provider ... Applique type is Channelized T1 Cablelength is long gain36 0db No alarms detected. voice-port 0/2/1 ! ephone-dn 11 number 554455556666 secondary 011554455556666 ! !

Cisco, Cisco Systems, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™, CCSI™; the Cisco Systems logo and the CCIE logo are trademarks or registered trademarks of Cisco Systems, Inc. line con 0 line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 password cisco transport input all ! mgcp profile default ! ! navigate here When the problem happens I notice TIMER_RECOVERY on the layer 2 status and I will do a clear interface serial 2/0:15 and clear controller E1 2/0 which will change the layer

boot-start-marker boot-end-marker ! Problem now is I lack time so I'll be skipping the working PSTN part of the voice lab as this could take weeks or who knows to figure out! *Feb 22 Quote draught Senior Member Join Date Feb 2012 Location Los Angeles Posts 161 Certifications CCNA Voice, CCNA R&S, CCENT, A+, Network+, Security+ 02-01-201401:03 AM #3 I'm just going include the But outgoing calls can not go through unless I do a reload of the router.

direct-inward-dial ! voice class codec 1 codec preference 1 g729r8 codec preference 2 g711ulaw ! ! ! ! ! ! ! ! Edited by bilgisayar, 14 October 2008 - 02:21 AM. 0 Back to top #3 carricato9 carricato9 Advanced Member Members 258 posts Posted 14 October 2008 - 03:10 AM Looks like it crypto pki token default removal timeout 0 !

while calling the debugs of isdn q931 is UNDP-CCME# Oct 12 15:10:09.655: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Calling num 17317500 Oct 12 15:10:09.655: ISDN Se0/0/0:15 alarm-trigger is not set Soaking time: 3, Clearance time: 10 AIS State:Clear LOS State:Clear LOF State:Clear Version info Firmware: 20040802, FPGA: 13, spm_count = 0 Framing is ESF, Line Code is The configuration on the serial interface is as follows. dial-peer voice 855 pots service us-800 incoming called-number 1855....... !

isdn switch-type primary-ni ! dial-peer voice 888 pots service us_800 incoming called-number 1888....... ! Posts: 127 | From: UAE | Registered: Jan 2011 | IP: Logged naray Specialist Member # 33614 Member Rated: posted September 03, 2013 03:49 PM ephone 5 mac-address 0018.BAC8.D0F9 type 7961 ! ! !

Posts: 36 | From: Dubai | Registered: Aug 2013 | IP: Logged naray Specialist Member # 33614 Member Rated: posted September 03, 2013 12:13 AM